In my first collaboration as The Glow-In-The-Dark Man I worked with PJ Kempen, who did this fantastic sculpt of a mushroom. I made a mold of it and this is my first casting. (*Updated with photos of second mushroom below.) Of course first castings at my place must always be glow-in-the-dark! 😎 (If I have any say in it! 😁😇)
Size is 2.75″ (8 cm) W x 2.25″ (6 cm) H. Made with Glow, Inc.’s glow powders “Pure Blue” (my personal favorite glowing color!) and “White”, which was manually applied to the “dots” on top of the mushroom before pouring the resin. I wasn’t sure if that would be enough of the white powder, but I think it came out nice.
I confirmed this was still glowing after a full night in darkness! Not much, but definitely rated “still visible after 12+ hours”!😎 That would qualify it for my shop. But I may keep the first one. (If you’d like to buy one of these, please let me know, or just stay tuned! I’ll update this article with a link to my Etsy shop as soon as I list one of these.)
This was a “full mold”, meaning that I cast the entire object in silicone and then cut the silicone to the edge of the mushroom cap. The trick was knowing where it was located within the silicone. To accomplish all of this I did three things:
- I painted the edge of the cap on the original sculpture with glow-in-the-dark paint. I used the high quality V10 solvent based paint. Too much paint would distort the original sculpture and the solvent based generally requires less buildup.
- I used Dragon Skin silicone because it is somewhat translucent. Enough so that it allowed me to shine a UV light on the resulting block of silicone and determine (generally) where the edge of the sculpture was located. The only trouble was that I cut a little too far on the underneath in one spot, which results in an “extra veil”, of sorts, on the final mushroom. (This can be peeled off, and isn’t even noticeable except under the the closest scrutiny.)
- In order to suspend the mushroom and create a “funnel” to pour the resin into, I added a small amount of clay around the base of the mushrooms, on the sides. I blended with the veins on the existing sculpture to make this “transparent”. I did this to maintain the indent on the bottom of the mushroom to house a magnet. (Unfortunately, I did not photograph this stage. In retrospect I should have because it was destroyed when I removed the original from the mold.)
This all worked out quite well, I think. One benefit of being a full mold is that it has a recess in the bottom to receive a small magnet, which we’ll simply glue in place. That means this mushroom should be pretty solid on any ferrous metal.
Another benefit is that it stands on its own the same as the original sculpture. Notice that he intentionally made one side lower than the other so it would appear more organic. There are many other asymmetries that I’m sure you can see.
A note about photo quality: unfortunately I broke the remote for my DSLR and that makes it almost impossible to take pictures of this in the dark. By using my iPad, I was able to get these. I do intend to remedy this situation very soon. I think better photos will be in order at that time. Please stay tuned. (Subscribe to this post if you’d like and I’ll update it for you.)
Update 2017.07.23 – Amanita Muscaria colors
Here are side views of the first two. I think I like this view the best!
P.S. “Phosphorescent Mushroom” would be a good name for a band, wouldn’t it?!? 😃